T-48 Epoxy Coat Chip Seal

More Product Info

T-48 Chip Seal is a polysulfide epoxy based resin and broadcast aggregate system used for restoration and preservation of concrete bridge deck surfaces and other types of concrete pavements.

Transpo's T-48 Chip Seal when applied as a single coat will result in a thickness of approximately 1/8 inch and will add less than 1/2 pounds of dead load per square foot of surface area which is an important consideration for maintenance of older structures.

The short curing time assures a minimum down time and a quick restoration of service. The broadcast aggregate provides a highly durable, skid resistant surface that can be used for vehicular and pedestrian applications.

Features and Advantages

    • Concrete Bridge Decks
    • Fast Cure (Approximately 2-3 Hours at 70° F)T 526 Diagram For web
    • Wide Application Temperature (50°-100°F)
    • Easy Application
    • Skid Resistant
    • High Early Strength (5,000 Psi At 3 Hours)
    • Strong Bond
    • High Elasticity
    • UV Light Resistant
    • Freeze-Thaw Resistant
    • Moisture and Chemical Resistant


Transpo T-48 Chip Seal is most often applied as a single coat system however a multi-coat system may be applied on projects requiring thicker applications.

T-48 Chip Seal can be used as a sealer/wearing surface on various types of structures:

      • Concrete Bridge Decks
      • Parking Garages
      • Ramps and Sidewalks

For more information, please refer to the technical data sheet.

More in this category: T-18 Thin Overlay »

transpoIndustries logo

Transpo Industries is a transportation infrastructure safety and materials company, founded in 1968. Its executive management has over 130 years of collective industry expertise and has been working together for decades. Transpo’s influence extends far beyond its sales and engineering operations.

Contact Info

20 Jones Street
New Rochelle, NY 10801

Phone: 914.636.1000
Toll Free: 800.321.7870

Fax: 914.636.1282