Break-Safe_no_text (1)
TESTED TO MASH STANDARDS

Break-Safe® Multi-Directional Breakaway Sign Support System

Break-Safe® breakaway sign supports hold ground-mounted signs in the roadside clear zone through wind and weather, then release cleanly upon vehicular impact to reduce injuries and property damage. Transpo’s breakaway sign support system has served the United States, Canada, and beyond for over 40 years.

What Are Breakaway Sign Supports?

Breakaway sign supports are a roadside safety essential: they keep a sign rigid in service but let it give way in a crash. When a vehicle strikes a breakaway sign post, the post separates at its base and swings clear instead of stopping the car cold.

How the Break-Safe System Works

Break-Safe connects each post to precision-machined couplings threaded into anchors set flush with the concrete foundation. Its high-strength coupling and L-bracket design adds capacity as posts get larger, meeting the wind load demands of today’s bigger signs.

Multi Directional Performance

Breaks away consistently and predictably, whatever the vehicle’s angle of impact.

Low Profile

After-impact stub height is less than one inch above the foundation.

Hinge Plates

On multi-post signs, only the struck post swings out; the others stay intact.

Durable Hardware

Couplings and hardware are hot-dip galvanized per ASTM A153.

Easy Installation

No special tools; just the AISC turn-of-nut method.

Crash-Tested to MASH Standards and FHWA Approved

Break-Safe is crash-tested to MASH standards and has decades of field use under NCHRP Report 350 approval. All models are FHWA-approved for the National Highway System (NHS) and Federal-Aid projects; see the FHWA acceptance letter and the Break-Safe Design Book.

Choosing the Right Break-Safe Model

Break-Safe fits steel or aluminum posts up to the largest size AASHTO permits:

  • Type A models: standard I-beams, W6 wide flange beams, round pipe, and square tube up to 4 inches.

  • Type B models: (B525 and B650): wide flange I-beams from 6 to 21 inches and square tube from 5 to 8 inches.

The right model depends on sign size, post type, and wind loads; our Signpost Selection Program runs the structural analysis and recommends a model. For light poles or wayfinding signs, see Pole-Safe® and our Wayfinding sign breakaway supports.

Frequently Asked Questions

Yes. Both describe sign post breakaways that release predictably from any direction, so if your plans call for multi-directional breakaway sign posts, Break-Safe is built for that.

The MUTCD requires ground-mounted sign supports within the clear zone to be breakaway, yielding, or shielded by a barrier or crash cushion. Breakaway signs are often the simplest way to comply.

Usually, yes. The anchors and foundation typically stay intact, so crews replace only the damaged post section and hardware.

Yes. Each shipment includes a Materials Certificate confirming all steel components are of U.S. origin and manufacture.

Get a Quote

Questions about your project? Call our safety team at 800.321.7870 or use the form below.